Our Indoor Air Technology Produces Healthier Air

As we prepare to reopen indoors, Osmosis would like to ensure our community of guests and staff understand the extensive measures we have taken to treat the inside air at Osmosis.

Breathe Easy

We installed a state-of-the-art air cleaning system in July, called Atmosair, at Osmosis. We feel it is imperative to do everything in our power to protect you and our guests. This system in combination with the 4-stage HEPA filters in every room provides a high level of hygienic indoor air quality.

The system we have installed in our HVAC equipment is called bipolar ionization. It energizes the air to form bipolar — positive and negative — air ions that flows into all of the spaces in our building.

AtmosAir’s technology proactively emits bi-polar ions that attack and neutralize bacteria, mold and virus in a continuous way. Unlike many unverified products, AtmosAir Solutions is backed by science. Bi-Polar Ions emitted to ambient air by the AtmosAir System continuously disinfect both the breathing space and surfaces. It is the most effective system for continuously cleaning and decontaminating indoor air. AtmosAir has shown significant reduction of bacteria and viruses in both laboratory and in situ testing. AtmosAir is over 99.9 percent effective in reducing the coronavirus on surfaces.

This excerpt from a paper written by Dr. Philip M. Tierno Jr., Professor of Microbiology and Pathology, New York University School of Medicine in April 2017 provides details on the air purification system that has been installed in the Osmosis HVAC system.

Cleaning Indoor Air using Bi-Polar Ionization Technology

Bipolar ionization is created when an alternating voltage source (AC) is applied to a special tube with two electrodes. When voltage is applied to the tubes electrodes (like electricity is applied to a light bulb’s filament) an ionization field is produced around the tube (just as light is produced from the light bulb). However, the ionization cannot be seen but its presence will result in “mountain air” freshness. Such ions occur naturally especially on mountain tops and waterfalls, where the production of both positive and negative ions purify the air.

The airflow distributes the energized ions into all spaces served by the duct system in an in-duct installation.

Unlike most air purification systems AtmosAir seeks out particulates and contaminants, including germs and does not wait for pollutants to find their way into the filter within the air handler. Instead charged ions go to the contaminants in the space where you breathe, just as in nature, and do so in a continuous fashion and with continuous disinfection.

These positively and negatively charged ions have an effect on dust particles, allergen VOC’s, odors, and bacteria, viruses, molds and mold spores. For example, regarding particles—oppositely charged ions cause particles to attract to other particles and become bigger and heavier, by a process called “agglomeration”. These bigger heavier particles can now be better trapped by HVAC system filters so the filters operate more efficiently. Also the many small particles that are generated within a space by people and their activities may never get to system filters and ordinarily stay suspended in air for long periods and can be breathed in, increasing the chance of illness and respiratory distress. The bi-polar ion process will drop these to the floor quickly taking them away from where we breathe. VOC’s or gaseous chemical off gasses typically cause odors and irritations. These are also a major source of “Sick Building Syndrome” complaints, where people feel ill at work but feel better when they leave the building. Bi-Polar ions break down hydrocarbon chains that make up these complex compounds into immeasurable levels of carbon dioxide and water vapor.

On micro-organisms like bacteria, virus and molds, bi-polar ions will interrupt the reproductive ability of these organisms so rather than colony forming units (cfu) increasing and spreading and expanding, they shrink away and lessen the chance of infection. The Effect of Bipolar Ionization generators on microorganisms: The negative and positive ions that are generated by BPI are designed to treat and allow energy imparted by the ions to transform ordinary oxygen into Reactive Oxygen Species (ROS), Superoxides, Peroxides, and Hydroxyls. These ions have the property of clustering around micro-particles, and thus, they surround harmful substances such as airborne mold, viruses, bacteria and allergens. At that point, a chemical reaction occurs on the cell membrane surface, and they are transformed into OH radicals, which are powerfully active (Standard Oxidation Potential [V] = 2.81 for OH vs H2O2 = 1.78 and OO2 = 1.23) and because they are unstable, they rob the harmful substance of a hydrogen atom (H). The result is that they are inactivated by severing the protein on cell membrane, which causes the opening of holes, thusly destroying the entity. The OH radicals instantly bond with the removed hydrogen(H), forming water vapor (H2O) which returns to the air. It is most important to note that bipolar ionization kills microbes without damaging DNA (therefore it does not cause cancer) in the interior of cells and unlike other physical and chemical agents, such as UV light, radioactivity and use of caustic chemicals, BPI is totally GREEN and it does NOT adversely affect the environment in any way.